H805 adapter

[Boli46]

what are the chances of fabricating your own female threaded flange adaptors?

What I need is an adapter with a male thread at one end and the usual 288 three bolt flange at the other. The threaded throat on the horn is female.

Me fabricating? Zero knowledge, zero experience and zero equipment are factors against this course of action.

- - - Updated - - -

"The threaded throat is bolted on, but the 30162 will not fit, unfortunately"

Maybe an adapter plate could be made. Pictures and possibly dimensions of the internal rectangular port with the bolt hole lay out would be helpful. After we have this the same dimensions from the 30162 adapters would tell us if a simple plate could be used to adapt 30162 to your existing horns. But due to Murphys law, that would be much to simple.

Or due you mean that there is no adapter from the horn to the thread mount? That the end of the horn is threaded? If that is the case, making the adapter gets much more complicated.

Like I said, a picture would be very beneficial.

BillWojo

There is a flange on the threaded throat that bolts to the horn. But this flange is much smaller than the flange on the 30162. I have a pair of 30162s and there is no way they could be adapted to fit the horn.

It's 10:40 pm here in Sweden and I am leaving early in the morning. Pictures will have to wait.